I wanted "25" to be the center point of the front of the card (there are certain birthdays where you have to include the age on them, and 25 is one of them.) I made the cowgirl hat to fit my BFF's tastes: (the bright pink was picked out using the Imagine's RGB colors,) and I placed a star jewel on it. "Quarter of a Century" was written using the Opposite's Attract cartridge (welded together with my gypsy.) The cow (a favorite of my bff) was made using Create a Critter, the balloons are from Best Friends and the grass is from Zooballoo (and welded with the gypsy.) The font and the hat are from Old West. Everything that didn't require the gypsy was cut and colored using the Imagine and white paper. I don't own my bff's favorite colors in cardstock (bright pink and bright blue) so the Imagine was perfect for this project.
Wednesday, October 13, 2010
BFF Birthday
I asked my best friend if I could borrow her Old West cartridge to scrap a few horseback riding pictures for my Gma. She said that she liked the cartridge, but couldn't get much use out of it and wanted to see what I came up with. As it turned out, her birthday was right around the corner, so I thought I'd use her cartridge to make her a card. This cartridge really is perfect for her as she is a country girl.


I wanted "25" to be the center point of the front of the card (there are certain birthdays where you have to include the age on them, and 25 is one of them.) I made the cowgirl hat to fit my BFF's tastes: (the bright pink was picked out using the Imagine's RGB colors,) and I placed a star jewel on it. "Quarter of a Century" was written using the Opposite's Attract cartridge (welded together with my gypsy.) The cow (a favorite of my bff) was made using Create a Critter, the balloons are from Best Friends and the grass is from Zooballoo (and welded with the gypsy.) The font and the hat are from Old West. Everything that didn't require the gypsy was cut and colored using the Imagine and white paper. I don't own my bff's favorite colors in cardstock (bright pink and bright blue) so the Imagine was perfect for this project.
I wanted "25" to be the center point of the front of the card (there are certain birthdays where you have to include the age on them, and 25 is one of them.) I made the cowgirl hat to fit my BFF's tastes: (the bright pink was picked out using the Imagine's RGB colors,) and I placed a star jewel on it. "Quarter of a Century" was written using the Opposite's Attract cartridge (welded together with my gypsy.) The cow (a favorite of my bff) was made using Create a Critter, the balloons are from Best Friends and the grass is from Zooballoo (and welded with the gypsy.) The font and the hat are from Old West. Everything that didn't require the gypsy was cut and colored using the Imagine and white paper. I don't own my bff's favorite colors in cardstock (bright pink and bright blue) so the Imagine was perfect for this project.
Monday, September 6, 2010
Dog Beach
The sun was cut from Create a Critter. I used the hide condor function on my gypsy to hide the face so I could use the sun as a journal block. The sea lion was also cut from Create a Critter. The fish and dolphin were cut from Life is a Beach. The Goofie Dog was cut from Paper Pups and the tennis ball was from Everyday Paper Dolls. The wave was from Graphically Speaking. I tore a piece of brown paper to create the sand and I triple matted the picture and used my corner rounder.
Monday, August 2, 2010
Beaver Thank You Card
My Auntie is continually spoiling me. Not only with goodies, but with inspiration as well. She showed me a card that she made using the skunk from Create a Critter. The skunk was purple! I love purple and thought it was the cutest card. She then brings out a package of tiny purple bows and gives them to me along with red paper with white polka-dots. I have been looking for this paper for years! (Perfect for Minnie Mouse!) So I made her a Minnie with the paper (finally Minnie is wearing the proper clothes!) and made this card to send to her. This card is really out of the box for me. But I wanted to stretch myself and use some of the ideas that she's taught me. My aunt always uses the best patterned paper. Her colors always coordinate really well. Mine aren't perfect, but I think it's a step in the right direction. :-) The beaver is from Create a Critter and the paw prints are a EK boarder punch. The ribbon is from Michael's dollar bin. The flower that the beaver is holding is a button. I threaded yellow embroidery thread through it. And the beaver is wearing one of the lovely bows that my Aunt got me. I hope she likes it!
City Birthday
I made this card for my cousin Joey's 13th Birthday. He loves New York and just about any other city one could think of. The sky-scape is from Going Places. I welded two together and used the hide condor feature on the windows and created my own windows so I could hide the number "13." The plane and the banner are from Stand and Salute. The sentiment was cut out using Pooh Font (Marker Feature.)
Creative Escape
I made this card for a Cricut Circle Contest. The bridge is from Pooh and Friends, The butterfly is from Create a Critter, the sign is from Everyday Paper Dolls, the grass is also from Everyday Paper Dolls, but I removed the cats-eye and put on the flowers (with stickles) from Gypsy Wanderings. The sentiment is also from Gypsy Wanderings. I added Glossy Accents to the water under the bridge. I "cut" out the bridge first with a Cricut marker, then I recut using the actual blade. I like the overall affect. :-)
Friday, July 9, 2010
Another Post-It Holder
Thursday, July 8, 2010
Painting My ATG Gun
Yesterday I painted my ATG gun. It was a lot of fun! Here's a quick tutorial on how I did it...
1. The first thing that I did was pick out my paint. I looked at several home improvement stores, Walmart and Joanns. The only plastic spray paint that they had was in black, white or brown. I asked a worker at Lowe's about priming first and then painting with a paint that wasn't made for plastic. He said that he would not recommend it. I searched the web and found that some ladies who painted their ATGs with different paints had mixed results. Because I didn't want to risk ruining my ATG, I decided to keep searching for different plastic paints. I finally found a pretty blue at Michaels (Krylon Fusion for Plastic) and picked up the Krylon Glitter Spray as well. The glitter spray said it would work as a finish on any paint.
2. Next I prepared my ATG for painting. I went over it with a damp paper towel to remove any dust. Here is what my ATG looked like at that point:
3. Next I removed the tape:
You can wait to paint your ATG when you run out of tape, but because I was between projects, I didn't want to wait. So I simply cut off most of the used tape, leaving enough to wrap around the wheal when I was finished so I didn't have to waste any of the unused tape.
4. Next you'll need a Phillips Screwdriver to remove both the wheals that the tape sits on.

5. You cannot remove any other parts without risking damage to your ATG gun, so it is best to take the time to cover them with blue painters tape. Remember that paint will go into any nook that isn't covered with tape. Here's what mine looked like after I taped it up:
I forgot to take a picture of the other side of the lid. I covered everything with the tape other than the little window that had "Scotch ATG" written on it. I wanted to paint over that. :) You can paint the lid if you would like. I like the look of the lid as is, and I like being able to see the tape through the lid.
6. Go over your ATG one more time with a damp towel. Make sure you get off any dust or fingerprints.
7. Paint your ATG! Follow the instructions on the back of the spray can. You should always paint in a well ventilated area and have something to wipe off any drips that may occur. I originally put my ATG in a box lid and surrounded the area with garbage bags so I wouldn't get paint everywhere. My instructions said it would take 15 minutes to dry. So I painted one side and when I went to "check" on it 15 minutes later, one of my garbage bags was lying on top of it! Some of the paint was smudged so I sanded it down with fine sandpaper. After that I found it easier to hold the lid of the ATG while I was spraying it. It only took a few minutes for the paint to dry. I did several coats, allowing it to dry completely between coats. Lastly, I sprayed the glitter spray. The glitter covered all defects in my painting skills. I love how it turned out.
8. The glitter sray can said it would dry in 10-15 minutes (it actually took less than 5). But not to handle it until after 2 hours. So after it was dry to the touch, I let it "settle" for 2 hours inside before removing all of the tape. The tape was a lot easier to take off than to put on! I then screwed the wheals back in and replaced the tape. Here is what my completed ATG looked like:


9. Finally, I added a few stickers and a ribbon (I needed some purple!).
That's it! It took me most of the afternoon, but it was a lot of fun! :)
1. The first thing that I did was pick out my paint. I looked at several home improvement stores, Walmart and Joanns. The only plastic spray paint that they had was in black, white or brown. I asked a worker at Lowe's about priming first and then painting with a paint that wasn't made for plastic. He said that he would not recommend it. I searched the web and found that some ladies who painted their ATGs with different paints had mixed results. Because I didn't want to risk ruining my ATG, I decided to keep searching for different plastic paints. I finally found a pretty blue at Michaels (Krylon Fusion for Plastic) and picked up the Krylon Glitter Spray as well. The glitter spray said it would work as a finish on any paint.
2. Next I prepared my ATG for painting. I went over it with a damp paper towel to remove any dust. Here is what my ATG looked like at that point:
3. Next I removed the tape:
4. Next you'll need a Phillips Screwdriver to remove both the wheals that the tape sits on.
5. You cannot remove any other parts without risking damage to your ATG gun, so it is best to take the time to cover them with blue painters tape. Remember that paint will go into any nook that isn't covered with tape. Here's what mine looked like after I taped it up:
6. Go over your ATG one more time with a damp towel. Make sure you get off any dust or fingerprints.
7. Paint your ATG! Follow the instructions on the back of the spray can. You should always paint in a well ventilated area and have something to wipe off any drips that may occur. I originally put my ATG in a box lid and surrounded the area with garbage bags so I wouldn't get paint everywhere. My instructions said it would take 15 minutes to dry. So I painted one side and when I went to "check" on it 15 minutes later, one of my garbage bags was lying on top of it! Some of the paint was smudged so I sanded it down with fine sandpaper. After that I found it easier to hold the lid of the ATG while I was spraying it. It only took a few minutes for the paint to dry. I did several coats, allowing it to dry completely between coats. Lastly, I sprayed the glitter spray. The glitter covered all defects in my painting skills. I love how it turned out.
8. The glitter sray can said it would dry in 10-15 minutes (it actually took less than 5). But not to handle it until after 2 hours. So after it was dry to the touch, I let it "settle" for 2 hours inside before removing all of the tape. The tape was a lot easier to take off than to put on! I then screwed the wheals back in and replaced the tape. Here is what my completed ATG looked like:
9. Finally, I added a few stickers and a ribbon (I needed some purple!).
Subscribe to:
Posts (Atom)