Friday, July 9, 2010
Another Post-It Holder
Thursday, July 8, 2010
Painting My ATG Gun
Yesterday I painted my ATG gun. It was a lot of fun! Here's a quick tutorial on how I did it...
1. The first thing that I did was pick out my paint. I looked at several home improvement stores, Walmart and Joanns. The only plastic spray paint that they had was in black, white or brown. I asked a worker at Lowe's about priming first and then painting with a paint that wasn't made for plastic. He said that he would not recommend it. I searched the web and found that some ladies who painted their ATGs with different paints had mixed results. Because I didn't want to risk ruining my ATG, I decided to keep searching for different plastic paints. I finally found a pretty blue at Michaels (Krylon Fusion for Plastic) and picked up the Krylon Glitter Spray as well. The glitter spray said it would work as a finish on any paint.
2. Next I prepared my ATG for painting. I went over it with a damp paper towel to remove any dust. Here is what my ATG looked like at that point:
3. Next I removed the tape:
You can wait to paint your ATG when you run out of tape, but because I was between projects, I didn't want to wait. So I simply cut off most of the used tape, leaving enough to wrap around the wheal when I was finished so I didn't have to waste any of the unused tape.
4. Next you'll need a Phillips Screwdriver to remove both the wheals that the tape sits on.

5. You cannot remove any other parts without risking damage to your ATG gun, so it is best to take the time to cover them with blue painters tape. Remember that paint will go into any nook that isn't covered with tape. Here's what mine looked like after I taped it up:
I forgot to take a picture of the other side of the lid. I covered everything with the tape other than the little window that had "Scotch ATG" written on it. I wanted to paint over that. :) You can paint the lid if you would like. I like the look of the lid as is, and I like being able to see the tape through the lid.
6. Go over your ATG one more time with a damp towel. Make sure you get off any dust or fingerprints.
7. Paint your ATG! Follow the instructions on the back of the spray can. You should always paint in a well ventilated area and have something to wipe off any drips that may occur. I originally put my ATG in a box lid and surrounded the area with garbage bags so I wouldn't get paint everywhere. My instructions said it would take 15 minutes to dry. So I painted one side and when I went to "check" on it 15 minutes later, one of my garbage bags was lying on top of it! Some of the paint was smudged so I sanded it down with fine sandpaper. After that I found it easier to hold the lid of the ATG while I was spraying it. It only took a few minutes for the paint to dry. I did several coats, allowing it to dry completely between coats. Lastly, I sprayed the glitter spray. The glitter covered all defects in my painting skills. I love how it turned out.
8. The glitter sray can said it would dry in 10-15 minutes (it actually took less than 5). But not to handle it until after 2 hours. So after it was dry to the touch, I let it "settle" for 2 hours inside before removing all of the tape. The tape was a lot easier to take off than to put on! I then screwed the wheals back in and replaced the tape. Here is what my completed ATG looked like:


9. Finally, I added a few stickers and a ribbon (I needed some purple!).
That's it! It took me most of the afternoon, but it was a lot of fun! :)
1. The first thing that I did was pick out my paint. I looked at several home improvement stores, Walmart and Joanns. The only plastic spray paint that they had was in black, white or brown. I asked a worker at Lowe's about priming first and then painting with a paint that wasn't made for plastic. He said that he would not recommend it. I searched the web and found that some ladies who painted their ATGs with different paints had mixed results. Because I didn't want to risk ruining my ATG, I decided to keep searching for different plastic paints. I finally found a pretty blue at Michaels (Krylon Fusion for Plastic) and picked up the Krylon Glitter Spray as well. The glitter spray said it would work as a finish on any paint.
2. Next I prepared my ATG for painting. I went over it with a damp paper towel to remove any dust. Here is what my ATG looked like at that point:
3. Next I removed the tape:
4. Next you'll need a Phillips Screwdriver to remove both the wheals that the tape sits on.
5. You cannot remove any other parts without risking damage to your ATG gun, so it is best to take the time to cover them with blue painters tape. Remember that paint will go into any nook that isn't covered with tape. Here's what mine looked like after I taped it up:
6. Go over your ATG one more time with a damp towel. Make sure you get off any dust or fingerprints.
7. Paint your ATG! Follow the instructions on the back of the spray can. You should always paint in a well ventilated area and have something to wipe off any drips that may occur. I originally put my ATG in a box lid and surrounded the area with garbage bags so I wouldn't get paint everywhere. My instructions said it would take 15 minutes to dry. So I painted one side and when I went to "check" on it 15 minutes later, one of my garbage bags was lying on top of it! Some of the paint was smudged so I sanded it down with fine sandpaper. After that I found it easier to hold the lid of the ATG while I was spraying it. It only took a few minutes for the paint to dry. I did several coats, allowing it to dry completely between coats. Lastly, I sprayed the glitter spray. The glitter covered all defects in my painting skills. I love how it turned out.
8. The glitter sray can said it would dry in 10-15 minutes (it actually took less than 5). But not to handle it until after 2 hours. So after it was dry to the touch, I let it "settle" for 2 hours inside before removing all of the tape. The tape was a lot easier to take off than to put on! I then screwed the wheals back in and replaced the tape. Here is what my completed ATG looked like:
9. Finally, I added a few stickers and a ribbon (I needed some purple!).
Friday, June 25, 2010
Freezer Tee Shirt
Every year my Uncle takes his boys on a camping trip. This year most of the Miller family decided to tag along. We usually get together every few years anyway so it was about time for another family reunion. And what a better spot than Yosemite National Forest? I've made freezer t-shirts before and had been looking for an excuse to make another one. I'm one of those people who takes a billion pictures every trip. (After all, you need pictures for scrapbook pages!) I was originally just going to put a camera on the front of the shirt and call it a day, but I came across this sign on the way to a hiking trail. I thought it'd be funny on the back of my camera shirt. :) The camera is from Going Places, the font is from Ashlynd's Alphabet and the heart is from Create a Critter. I used my Gypsy to space out the words the way I liked it and cut out the flipped image on freezer paper. It is very important to cut the flipped image as you need to iron the shinny side face down but you have to cut the shinny side face up on the Cricut (it wont stick face down.) So if you don't flip the image then when you go to iron it down it'll be backwards. I usually iron down the negative of the image and use it as a stencil. I thought it'd be fun to do the "Warning" opposite by ironing down the positive image and painting all around it. I bought the shirt and paint at Joann's. You can get the freezer paper at any grocery store.
From the Pets
My best friend is house-sitting for us while we go on a family trip to Yosemite. It's quite the task as she'll be watching a crazy dog and a bunch of needy cats along with a bunny and a lizard. I made her this card to show our appreciation. The cat and dog image (isn't it the cutest??) is from Paper Pups. The ribbon is from Michaels dollar bins and the paw print border is an EK boarder punch. The stamp is the same dollar stamp that I used on the bird house card. I used the same Sticko bubble/tile sticker to make the paw print embellishment. This paw print was actually cut from ribbon that I also found in the dollar bin at Michaels. My circle punch wouldn't cut out the ribbon all of the way, but it left an indent so I was able to cut it out by hand.
Birdhouse Card
This card is for my Aunt and Uncle who live in Park City, Utah. My aunt loves bird houses, so I thought up this card for her. The bird house is from Stretch Your Imagination. It doesn't have any layers, but I used the hide condor feature on the gypsy and created my own. The flowers on the bird house were welded together and layered (from Create a Critter.) I used pearl stickles for the center. Similarly, the bird didn't have any layers but I used my gypsy to create some. The bird is from Home Decor. I used Inkssentials Glossy Accents from Ranger Ink on the bird's wing. It created a bubble affect and I just love how it turned out. The ribbon is from Joann's and the stamp is a stamp found in Michaels dollar bins.
Piggy Card
This card is for my "Auntie" and her family. It is her "fault" that I am into scrapbooking and card making. (I'm sure that she'll gladly accept the blame.) She makes the most gorgeous scrapbooks and fun cards and inspired me to take up the craft. I love looking through her creations and getting ideas. I recently received the Peachy Keen stamp set that is used to coordinate with the Animal Kingdom cartridge for my Birthday. The first two things that I made were penguins (for my sister) and this pig for my aunt. The stamps have set sizes listed to cut the Cricut images out. But I also cut some smaller images and larger images and found that the stamps look nice on those also. Make sure you cut the image in Blackout so that the eyes and other facial features don't cut out. I chose to use the new hide condor feature on the gypsy instead so I could keep the other cuts by the legs and ears. I then inked the pig and used pop ups. The red mat was embossed using the Swiss Dots folder. The patterned paper is from a DCWV pack that I found on clearance at Joann's.
Another TY Card
So I liked the last card so much that I wanted to make another one for my grandmother. I changed the colors and used a EK border punch to make the cards different and to suit the receiver's different styles. For the center of the flower I used a half inch circle punch and punched out a flower from some patterned paper that I bought at Joann's. I then placed a Sticko tile sticker over the paper. It gives it a bubbled appearance. I thought that the sticker and the punch were the same size, but they're not! Luckily it was easily fixable using my gypsy. I simply layered two circles (from Walk in my Garden, but any circle would do) creating a circle border. It took a couple of cuts to get the sizing exactly as I wanted, but I cut out a bunch and saved the file so it wont be hard to create more of these.
Subscribe to:
Posts (Atom)